Vessel Studio / Form, texture & light

A shape of your own.

Turn a simple profile into a sculptural vase or a useful bowl. Shape it, add a twist, and take your design from the browser to your slicer — with its settings and your name attached. Free, local and account-free.

Starting shape & design name

Design name

Shape your profile

Drag points to shape the vessel. Click the outline to add a point. The view fits your shape when you release.

Controls & shortcuts

Belly and mouth move vertically too; the bottom stays fixed. Move the top point above or below the height reference to arc the top. Arrow keys adjust; Shift moves by 10 mm. Delete removes an added point.

Exact dimensions

Height reference Base diameter Belly diameter Mouth diameter

Radial wall Base thickness

Recessed base · 2 mm

Leaves a flat support ring when enabled. Base thickness is the minimum material above the underside.

03 / Surface Flutes 24 Flute depth · mm 2 Twist · degrees 60

Preview colourMesh quality

Closed base, open mouth, modelled walls. Use normal slicing; this is not a spiral vase-mode mesh. Preview colour is not stored in the STL.

Print your vessel

Make it printable.

Print goal

Printing advice & limitations

Use a calibrated filament profile for temperatures, cooling and flow. Print upright on the base or support ring using normal slicing; check overhangs for supports. These are suggestions, not an embedded slicer preset. The selected advice is saved in the MeshVault package.

Based on Prusa’s watertight printing guidance. Settings cannot guarantee a leak-free print: inspect the sliced walls and base for gaps, then leak-test over a tray. Watertight does not mean food-safe.

Author & support links

Take it to your slicer

Model format

What’s in your MeshVault download?

Keep the shape with its story.

Your package contains the selected STL or 3MF, a 16:9 preview, your author details, printing advice and the design parameters as JSON. Everything is packaged on your device.

Import into MeshVault to review and organise the model. The parameters are reference data; MeshVault does not regenerate the design.

About the .mvpack format →