Modular Storage Designer / A place for everything

Storage that fits your space.

Build a workstation from stackable drawers, open bins and sloped tool organisers. Size each module, swap its inserts and take the complete build to your printer. Free, local and account-free.

01 / Choose your assembly

AssemblyDesign name

Selected module Module name Module type

Width · 42 mm unitsDepth · 42 mm unitsBody height · 7 mm unitsHorizontal grid position

Gridfinity underside Integrated Gridfinity stacking top Surface detail

Drawer compartments acrossCompartments deep

Rotating drawer latchHolds the drawer closed. Adds a printed turn button and washer, with an M3 × 14 mm screw and nut. Paper label holder · 36 × 9 mmUses the module name on a printable label sheet. Left insertLeft hole diameter · mmRight insertRight hole diameter · mm

Configure each half separately. Both inserts lift out and share the same housing. Tool holes leave 5 mm between their edges.

Removable HSW side panelsExperimental fit. Each panel needs four M3 × 20 mm countersunk screws and M3 nuts. Leave 16 mm outside a bare panel housing, 20 mm with a mounting plate or 46 mm with a hook; print the included socket coupon first.

Left panel accessoryRight panel accessory

Each accessory includes a rear clamp and needs one M3 × 16 mm countersunk screw and M3 nut. Mounting plates have two 4.5 mm holes, 32 mm apart. Accessories need at least 8 height units. Test the fit in the socket coupon first.

Build outputGenerate Lift-off Gridfinity top Gridfinity base on standalone drawer

The top rests on the cabinet. A Gridfinity drawer base uses whole 42 mm cells; it changes the drawer size and is for standalone use.

Bay 1Bay nameContents

Compartments acrossCompartments deep

Pull style Paper label holder · 36 × 9 mm

Size · millimetres

Column width Depth Selected row height Wall & floor

Fit & constructionFit clearance · mmExtra space across the insert width and above a full-height drawer, not per side.

Guides run along the side walls, leaving the storage space clear. The rear wall stops the insert. Dry-fit before printing a full set.

Your workstation · module layout

Your cabinet · front elevation

Select a bay to edit it

Storage that fits your space.

Your print plates

Print. Fit. Assemble.

Keep the build together.